Procyon-Plus Powder(50lb)

$192.87

Procyon Plus carpet and upholstery cleaner can be used with hot or cold water and can be used as a prespray or with cleaning systems such as truck mounts, steam cleaners, portable extractors, rotary scrubbers as well as for bonnet cleaning.  It offers enormous cost savings by eliminating defoamers, and acidic rinse agents.

Provides excellent cleaning results on heavy grease, oil & dirt soiled carpets and upholstery.  It will remove the ground-in dirt from severely soiled traffic lanes.

DIRECTIONS FOR USE: User assumes all liability and risk. Using more is NOT better. Use as directed.

 

PROCYON Plus comes with an easy-measure scoop:      1 level scoop = 2 oz.

 

Dwell Time = Approx. 10 minutes

 

PRE-SPRAY      Portable Sprayer: Mix 2 oz. to 1 gallon of HOT water. Allow to dwell. Extract with fresh water.      Bonnet Cleaning: Mix 2 oz. to 1 gallon of HOT water. Allow to dwell.      Hydro Force: Mix 16 oz. to 5 quarts of HOT water (8 to 1 ratio). Allow to dwell. Fresh water rinse.

 

PRE-SPRAY — HEAVY GREASE & OIL      Portable Sprayer: Mix 4 oz. to 1 gallon HOT water. Allow to dwell. Follow with In Tank directions.      Hydro Force: Mix 24 oz. to 5 quarts of HOT water (8 to 1 ratio). Allow to dwell. Follow with In      Tank directions.

 

IN TANK ONLY      Portable Extractor: Mix 4 oz. to 5 gallons of HOT water.      Truck Mount: Mix 16 oz. to 5 gallons of HOT water. Set Meter on 4-6. Heat setting at 180° to 200° F       is recommended.

 

UPHOLSTERY: As with any cleaning method, always test for color fastness in an out-of-the way area.      Pre-Spray – Portable Sprayer: Mix 2 oz. to 5 gallons of HOT water. Always apply  solution from the      base wetting upward to prevent streaking or runs.      Pre-spray – Hydro Force: Follow In Tank Truck Mount directions. Set meter on 2, reduce heat.

 

CAUTION: Always wipe off drips and overspray from all hard surfaces. This product is powerful enough to strip finished woodwork, stainless steel, marble, etc. PERSONAL PROTECTIVE EQUIPMENT: Protective gloves to minimize skin contact. Wash hands after using to avoid skin drying out. FIRST AID: In case of eye contact flush eyes with fresh water for 15 minutes. If swallowed, rinse mouth with plenty of water. If irritation persists, seek prompt medical help. IMPROPER USE may lead to adverse health effects. WASTE DISPOSAL METHOD: Dispose of in a landfill in accordance with all local, state, and federal regulations. Since conditions of usage are beyond our control, all recommendations are made without warranty, expressed or implied.

5 in stock

Categories: ,

Product Description

Procyon Plus carpet and upholstery cleaner can be used with hot or cold water and can be used as a prespray or with cleaning systems such as truck mounts, steam cleaners, portable extractors, rotary scrubbers as well as for bonnet cleaning. It offers enormous cost savings by eliminating defoamers, and acidic rinse agents. Provides excellent cleaning results on heavy grease, oil & dirt soiled carpets and upholstery. It will remove the ground-in dirt from severely soiled traffic lanes. DIRECTIONS FOR USE: User assumes all liability and risk. Using more is NOT better. Use as directed. PROCYON Plus comes with an easy-measure scoop: 1 level scoop = 2 oz. Dwell Time = Approx. 10 minutes PRE-SPRAY Portable Sprayer: Mix 2 oz. to 1 gallon of HOT water. Allow to dwell. Extract with fresh water. Bonnet Cleaning: Mix 2 oz. to 1 gallon of HOT water. Allow to dwell. Hydro Force: Mix 16 oz. to 5 quarts of HOT water (8 to 1 ratio). Allow to dwell. Fresh water rinse. PRE-SPRAY — HEAVY GREASE & OIL Portable Sprayer: Mix 4 oz. to 1 gallon HOT water. Allow to dwell. Follow with In Tank directions. Hydro Force: Mix 24 oz. to 5 quarts of HOT water (8 to 1 ratio). Allow to dwell. Follow with In Tank directions. IN TANK ONLY Portable Extractor: Mix 4 oz. to 5 gallons of HOT water. Truck Mount: Mix 16 oz. to 5 gallons of HOT water. Set Meter on 4-6. Heat setting at 180° to 200° F is recommended. UPHOLSTERY: As with any cleaning method, always test for color fastness in an out-of-the way area. Pre-Spray – Portable Sprayer: Mix 2 oz. to 5 gallons of HOT water. Always apply solution from the base wetting upward to prevent streaking or runs. Pre-spray – Hydro Force: Follow In Tank Truck Mount directions. Set meter on 2, reduce heat. CAUTION: Always wipe off drips and overspray from all hard surfaces. This product is powerful enough to strip finished woodwork, stainless steel, marble, etc. PERSONAL PROTECTIVE EQUIPMENT: Protective gloves to minimize skin contact. Wash hands after using to avoid skin drying out. FIRST AID: In case of eye contact flush eyes with fresh water for 15 minutes. If swallowed, rinse mouth with plenty of water. If irritation persists, seek prompt medical help. IMPROPER USE may lead to adverse health effects. WASTE DISPOSAL METHOD: Dispose of in a landfill in accordance with all local, state, and federal regulations. Since conditions of usage are beyond our control, all recommendations are made without warranty, expressed or implied.