Green Products

TriPlex 2x Rinse

Green Rinse - When used on carpets, fabrics and hard surfaces it is designed to neutralize alkalinity and help rinse away cleaning solutions, leaving behind a cleaner, brighter surface. It also provides anti-stain, anti-soiling and anti-wicking features to your carpet. Directions: Portable:Dilute Go Green Clean Rinse at 1/2oz. per gallon of water for normal SOIL CONDITIONS.  Dilute 1oz. per gallon of water for heavier soiling conditions.  Truckmount Use: Mix 16oz. per 5 gallons of water to make solution for use in chemical injection sprayer, meter 2-4 gallons per hour for normal conditions.
SKU #758239201124

$34.34 Gallon / Carton

TriPlex Carpet/Upholstery Cleaner

Meets or Exceeds EPA DfE  for normal maintenance and cleaning of stain resist/wool carpeting. Formulated to remove maximum amount of soil and not adversely affect the built-in properties of the carpeting. Features: Safe on Wool, Non-Toxic, Skin Friendly, Anti-Stain, Anti-Resoling Agents Directions: Portable Extractors: Add 2 ounces per 3 gallons onto your water and extract as usual.  If carpet is heavily soiled, add 4 ounces per 3 gallons of water.  Truck Mounted Extraction: Add 32 ounces per 5 gallon stock solution tank, meter as normal.
SKU #758239201056

$18.90 Gallon / Carton

TriPlex Pre-Spray

This Pre-Spray offers superior anti-staining, anti-soiling helping keep your carpets cleaner and stain free longer.  EPA design for environmental approval.  Safe on stain resistant nylon as well as wool.  There are no artificial brighteners. Directions:  Pump Sprayer: Dilute Pre-Spray at 6oz./gal. for normal cleaning, for heavier cleaning dilute at 8oz./gal.  Injection Sprayer: (1:9 Model): Add 1 ½ quarts of pre-spray to 5 quart container for normal conditions.  Add 2 ½ quarts to 5 quarts for heavier conditions.  Spray soiled areas and let dwell 10-15 minutes.  Rinse-extract with Go Clean Cleaner or Go Clean Rinse.
SKU #758239202053

$18.90 Gallon / Carton

TriPlex Green Guard Protector

Go Clean Green Guard Carpet Protectant is a cutting edge encapsulation product that contains anti-stain, anti-resoiling properties that neutralize alkalinity residues and limits wicking to carpets. Green Guard protects against soil clinging to the carpet fibers. This results in your carpet to Stay Cleaner Longer by preventing rapid soiling and staining. Simply spray on carpet to prevent browning or yellowing. Stops wicking permanently! When properly applied carpets stay cleaner longer, reducing fiber abrasion and prolongs the life and beauty of the carpet. Directions: Use as a topical spray or add to your cleaning solution. Dilute 1 to 9 with water and apply at a rate of 600 sq.ft. per diluted gallon. This polymer based technology offers the consumer considerable savings based on the cost of conventional carpet protectants. Total coverage area: 6000 sq.ft.
SKU #

$37.80 Gallon / Carton

Procyon-Plus Powder(50lb)

Procyon Plus carpet and upholstery cleaner can be used with hot or cold water and can be used as a prespray or with cleaning systems such as truck mounts, steam cleaners, portable extractors, rotary scrubbers as well as for bonnet cleaning.  It offers enormous cost savings by eliminating defoamers, and acidic rinse agents. Provides excellent cleaning results on heavy grease, oil & dirt soiled carpets and upholstery.  It will remove the ground-in dirt from severely soiled traffic lanes. DIRECTIONS FOR USE: User assumes all liability and risk. Using more is NOT better. Use as directed.   PROCYON Plus comes with an easy-measure scoop:      1 level scoop = 2 oz.   Dwell Time = Approx. 10 minutes   PRE-SPRAY      Portable Sprayer: Mix 2 oz. to 1 gallon of HOT water. Allow to dwell. Extract with fresh water.      Bonnet Cleaning: Mix 2 oz. to 1 gallon of HOT water. Allow to dwell.      Hydro Force: Mix 16 oz. to 5 quarts of HOT water (8 to 1 ratio). Allow to dwell. Fresh water rinse.   PRE-SPRAY -- HEAVY GREASE & OIL      Portable Sprayer: Mix 4 oz. to 1 gallon HOT water. Allow to dwell. Follow with In Tank directions.      Hydro Force: Mix 24 oz. to 5 quarts of HOT water (8 to 1 ratio). Allow to dwell. Follow with In      Tank directions.   IN TANK ONLY      Portable Extractor: Mix 4 oz. to 5 gallons of HOT water.      Truck Mount: Mix 16 oz. to 5 gallons of HOT water. Set Meter on 4-6. Heat setting at 180° to 200° F       is recommended.   UPHOLSTERY: As with any cleaning method, always test for color fastness in an out-of-the way area.      Pre-Spray - Portable Sprayer: Mix 2 oz. to 5 gallons of HOT water. Always apply  solution from the      base wetting upward to prevent streaking or runs.      Pre-spray - Hydro Force: Follow In Tank Truck Mount directions. Set meter on 2, reduce heat.   CAUTION: Always wipe off drips and overspray from all hard surfaces. This product is powerful enough to strip finished woodwork, stainless steel, marble, etc. PERSONAL PROTECTIVE EQUIPMENT: Protective gloves to minimize skin contact. Wash hands after using to avoid skin drying out. FIRST AID: In case of eye contact flush eyes with fresh water for 15 minutes. If swallowed, rinse mouth with plenty of water. If irritation persists, seek prompt medical help. IMPROPER USE may lead to adverse health effects. WASTE DISPOSAL METHOD: Dispose of in a landfill in accordance with all local, state, and federal regulations. Since conditions of usage are beyond our control, all recommendations are made without warranty, expressed or implied.
SKU #

$192.87 / Carton

Procyon-Plus Powder(5.5 jar)

Procyon Plus carpet and upholstery cleaner can be used with hot or cold water and can be used as a prespray or with cleaning systems such as truck mounts, steam cleaners, portable extractors, rotary scrubbers as well as for bonnet cleaning.  It offers enormous cost savings by eliminating defoamers, and acidic rinse agents. Provides excellent cleaning results on heavy grease, oil & dirt soiled carpets and upholstery.  It will remove the ground-in dirt from severely soiled traffic lanes. DIRECTIONS FOR USE: User assumes all liability and risk. Using more is NOT better. Use as directed.   PROCYON Plus comes with an easy-measure scoop:      1 level scoop = 2 oz.   Dwell Time = Approx. 10 minutes   PRE-SPRAY      Portable Sprayer: Mix 2 oz. to 1 gallon of HOT water. Allow to dwell. Extract with fresh water.      Bonnet Cleaning: Mix 2 oz. to 1 gallon of HOT water. Allow to dwell.      Hydro Force: Mix 16 oz. to 5 quarts of HOT water (8 to 1 ratio). Allow to dwell. Fresh water rinse.   PRE-SPRAY -- HEAVY GREASE & OIL      Portable Sprayer: Mix 4 oz. to 1 gallon HOT water. Allow to dwell. Follow with In Tank directions.      Hydro Force: Mix 24 oz. to 5 quarts of HOT water (8 to 1 ratio). Allow to dwell. Follow with In      Tank directions.   IN TANK ONLY      Portable Extractor: Mix 4 oz. to 5 gallons of HOT water.      Truck Mount: Mix 16 oz. to 5 gallons of HOT water. Set Meter on 4-6. Heat setting at 180° to 200° F       is recommended.   UPHOLSTERY: As with any cleaning method, always test for color fastness in an out-of-the way area.      Pre-Spray - Portable Sprayer: Mix 2 oz. to 5 gallons of HOT water. Always apply  solution from the      base wetting upward to prevent streaking or runs.      Pre-spray - Hydro Force: Follow In Tank Truck Mount directions. Set meter on 2, reduce heat.   CAUTION: Always wipe off drips and overspray from all hard surfaces. This product is powerful enough to strip finished woodwork, stainless steel, marble, etc. PERSONAL PROTECTIVE EQUIPMENT: Protective gloves to minimize skin contact. Wash hands after using to avoid skin drying out. FIRST AID: In case of eye contact flush eyes with fresh water for 15 minutes. If swallowed, rinse mouth with plenty of water. If irritation persists, seek prompt medical help. IMPROPER USE may lead to adverse health effects. WASTE DISPOSAL METHOD: Dispose of in a landfill in accordance with all local, state, and federal regulations. Since conditions of usage are beyond our control, all recommendations are made without warranty, expressed or implied.
SKU #

$36.79 / Carton

Procyon-Extreme Pre-Spray

1. Dirt and grease gets ground into the carpet. Procyon Extreme gets deep down into the carpet to break up and dissolve all the grime and dirt. Then the sodium in Procyon Extreme pushes all the dirt and grime to the top for easy and successful extraction. 2. Heavily soiled carpet with lots of foot traffic lays over and becomes flat. Procyon Extreme has a water softening agent that rejuvenates the carpet fibers. The carpet comes back to life feeling soft and looking full like it’s brand new. 3. Procyon Extreme works in only 1 or 2 Steps! When you see a heavily soiled entry way you start to gear up and think ‘I might need to do three or four steps to get all this out’. But this method costs more time and more money on products. Procyon Extreme will cut that in half by doing only two steps. 1 Step: Pre-spray and let dwell for 10 to 15 minutes, agitate and then do a fresh hot water extraction. If you feel it needs a little more…. 2 Step: Pre-spray with Procyon Extreme and let dwell for 10 to 15 minutes agitate and also rinse with Procyon Extreme and then agitate extract with fresh hot water. Directions TEST FOR COLOR FASTNESS: Prior to cleaning, test an out of the way area of carpet to insure color fastness. Apply a small amount of mixed, ready-to-use PROCYON to the area, wait one minute and blot with a white cotton towel (BLEACH FREE). Check for color fastness. User assumes all liability and risk. Using more is NOT better. Use as directed. Improper dilution and use can have increased risk of health effects. NOTE: THE HOTTER THE WATER THE MORE EFFECTIVE THE CLEANING. Product does not expire. DIRECTIONS: SHAKE BEFORE USING. Vacuum thoroughly. For home use, follow directions for portable extraction. PRE-SPRAY/EXTRACTION: For use on heavily soiled carpet traffic areas. Effectively dissolves grease, dirt, grime, spots and stains. Mix 4 oz. to 1 gallon of COLD, WARM, or HOT water. Pre-spray evenly. DO NOT OVER WET. Let dwell for 10 minutes. Extract with fresh water. PORTABLE EXTRACTION (without pre-spray): Mix 4 oz. to 1 gallon of COLD, WARM, or HOT water. For all portable extractors including extractors with a siphon tube. In this case, simply place the siphon tube into the concentrated liquid. ENCAPSULATION PRE-SPRAY: Mix 4 oz. to 1 gallon of COLD, WARM or HOT water - agitate. After fiber dries, vacuum thoroughly. BONNET CLEANING: Mix 4 oz. to 1 gallon of COLD, WARM, or HOT water. Pre-spray evenly on heavily soiled area. Let dwell for 10 minutes. For best results, bonnet using 100% cotton bonnet pads. WICKING & BROWNING: Mix 2 oz. to 1 gallon of COLD, WARM or HOT water. Pre-spray the carpet fiber. DO NOT OVER WET. Let dwell for 10 minutes. For best results bonnet using 100% cotton bonnet pads to absorb moisture and to prevent wicking or browning problems. UPHOLSTERY: Mix 2 oz. to 1 gallon of COLD or WARM water. Pre-spray evenly, applying from the base of the upholstery going up and extract from the top going down. HYDRO FORCE: Mix 32 oz. to 1 gallon WARM or HOT water (meter 1:8). Apply evenly. Let dwell for 10 minutes. TRUCK MOUNT: Fresh water rinse. Set heat at 180° to 200° F. NOTE: Rinsing agents are not needed.
SKU #

$26.11 Gallon / Carton

Procyon-Tile & Grout

Procyon Tile & grout cleaner will provide you with excellent cleaning results on tile floors, showers, bathrooms, kitchens, clay tile, pool tile, and grout, ultra safety & non-skid floors. Mix with hot or cold water and enjoy the enormous cost savings with an exceptional dilution ratio! Can be used for manual small area cleaning application such as a rotary scrubber, as well as in machines such as auto-scrubbers/scrubber-driers for large surface cleaning. Cuts through the toughest soil build-up. An excellent restorative cleaning product that will remove years of soil residue from tile or grout. DIRECTIONS: SHAKE BEFORE USING. Mix with cold water. Once product is applied, agitate with a brush, pick up solution and rinse thoroughly with fresh water. Let PROCYON dwell for 5 to 10 minutes. Using more is NOT better. Use as directed. Improper dilution and use can have increased risk of health effects. User assumes all liability and risk. NOTE: Check for damaged tile & grout. If sealant is present, the surface may need to be stripped prior to cleaning. SPRAY OR MOP APPLICATION: Mix 8 oz. to 1 gallon cold water. Apply mixture over area and let dwell. Use a rotary scrubber and/or a stiff brush to scrub area and rinse. DAILY MAINTENANCE: Mix 2 oz. to 1 gallon cold water. Mop or scrub and rinse. MEDIUM SOIL: Mix 4 oz. to 1 gallon cold water. Scrub and rinse. HEAVY SOIL: Mix 6 oz. to 1 gallon cold water. Scrub and rinse. EXTREME SOIL: Mix 8 oz. to 1 gallon cold water. Scrub and rinse. HYDRO FORCE: Mix 32 oz. to 1 gallon cold water (meter 1:8). Apply evenly. Keep floor wet and rinse. TRUCK MOUNT: Operate at 900 to 1,000 lbs. of pressure. Use tile tool. CAUTION: Do not use on varnished surfaces, leather, marble, limestone, travertine, acid sensitive stone or vinyl. This product will strip protective finishes if allowed to puddle. PERSONAL PROTECTIVE EQUIPMENT: Protective gloves to minimize skin contact. Wash hands after using to avoid skin drying out. FIRST AID: In case of eye contact flush eyes with fresh water for 15 minutes. If swallowed, rinse mouth with plenty of water. If irritation persists, seek prompt medical help. IMPROPER USE may lead to adverse health effects. WASTE DISPOSAL METHOD: Dispose of in a landfill in accordance with all local, state, and federal regulations.
SKU #

$29.63 Gallon / Carton